Compare ANTON KESSEL GMBH Electrically Height Adjustable Work Table, Plastic Coated Work Price

Electrically height adjustable work table, plastic coated worktop, width 2000 mm. Supplied = assembled. Worktop width = 2000 mm. Worktop depth = 800 mm. Type of worktop = plastic laminate (HPL) Panel thickness = 40 mm. Height adjustment range = 740 - 1140 mm. Frame material = steel, powder coated. Static distributed load = 600 kg. Frame design = lifting column with rear panel board. Frame colour = light grey RAL 7035. Height adjustment using an electric motor from 740 - 1140 mm at the touch of a button. High max. load of up to 900 kg. Ergonomic work even when alternating between standing and sitting. Four working heights can be programmed. Also ideal for workstations used in shifts. Ideal leg room and space for a mobile drawer unit under the worktop. Height adjustable by means of telescopic lift system operated by an electric motor. Height adjustment range 740 - 1140 mm. The working height can be adjusted continuously using the control panel. In addition, 4 preset working heights can be programmed. Lifting capacity per lifting column 300 kg. Total lifting capacity approx. 830 kg with evenly distributed load (900 kg lifting force minus the weight of the worktop) The two lifting columns are connected by the worktop and rear panel, thereby guaranteeing a secure and stable footing. The rear panel replaces the cross beams usually fitted in the centre between the lifting columns - the entire space between the feet can be utilised. The U-shaped rear panel in light grey RAL 7035 features good reinforcement due to additional angled profiles, and is also able to be used as a side panel when two benches are installed back to back. The tabletop depth of 800 mm provides a large work surface. This makes the table suitable as a basis for ergonomically designed system workstations with workbench add-ons. Plastic coated worktop. Delivered assembled - ready for immediate use.